hurco

The Closing Bell

Dirk Gage Got to be a part of the 50th Anniversary party at NASDAQ

Hurco executives rang the closing bell at the Nasdaq stock exchange June 13, 2018, as part of its 50th anniversary celebration. In addition, Hurco was featured on the NasdaqTower and Marquis in New York City. (Skip to the end of the video above to see footage of Hurco appearing on the building’s giant projector screen.)

IMG_1110.JPG
IMG_1109.JPG
IMG_1111.JPG
IMG_1112.JPG

Hurco VM10i Plus

VM10i-angle-MAX5.png

VM10i Plus

The Pocket Rocket

Hurco has been making updates and changes to there line in an almost continuous fashion for years now. This year alone has seen new software released for the mills, updated ballscrews on the VMX lines for faster rapids and travels, an update to the design for the VC 5 axis machines and now the addition of the "Plus" option to the VM line.

Standard Hurco VM10i - 10k spindle
New Hurco VM10i Plus - 12k Spindle with a chiller

This update also applies to the VM20i and the VM30i as well. 

It actually makes for a tough decsion on which Hurco to buy since the VMX24 and the VMX30 have 12k spindles as well. It really comes down to torque between these machines. If you need higher torque, then the VMX line os for you. But if your like most job shops and run into a variety of materials and the torque loads are not really a major factor, then the VM line, now with a 12k CAT40 Big Plus spindle just may be a perfect fit for you.

Proudly Made in the USA

Hurco-Proudly_Made-In-The-USA.png

Select models of Hurco CNC machines are made in the USA with globally sourced components. At our facility in Indianapolis, Indiana, the VMX42i and VMX6030i are fully assembled by Hurco employees. The build team hand scrapes machined surfaces; grinds mounting and surface plates; aligns castings, ball screws, mechanical housings, rails, and tool changes; drills and taps assembly and mounting holes. Additionally, the Indy build team completes a comprehensive inspection and certification process for each machine.

Check it out on Hurco's website.

 

 

5 Big reasons to buys a Hurco

What are the main reasons you buy any machine? Do you buy the same type of machine as what you already have? Do you buy what your father always bought? Why do I keep buying those same crappy chips for Cinco de Mayo? Sometimes you need to step outside of the box you made for yourself and really questions why your doing what your doing. A better way may save you a ton of money, and make for a better Cinco de Mayo.  (I swear thats how you spell it, but I am reading it may-o)

Advanced Class - Fixture Plate Design 101

Last week we held our first ever online training course. That sounds really stupid, it's 2018, where the hell have we been since like 2005? Anyway, we got our first one in the can. It went really well with a total of 9 attendees by the time we got finished. There were a few guys who couldn't make it on but that's okay! Because we have it right here for everyone to watch, and re-watch. We would love to hear your feedback on the class either here, on youtube or just send us an email directly.

Most Loved CNC Control

 Survey done by CNC CookBook, a website that receives 4 million visitors a year.

Survey done by CNC CookBook, a website that receives 4 million visitors a year.

Excerpt directly from there website. Results above.

CNC Control Customer Satisfaction: 2017

As in 2016, respondents were asked to report their Customer Satisfaction towards their control with the following responses:

  1. It Rocks! (Scored as 1.0)
  2. Works Fine (Scored as 0.0)
  3. Not Very Happy (Scored as -1)

A perfect score would therefore be 1.0, meaning every respondent said, “It Rocks!”

Customer Satisfaction Award, Pro Category: Hurco

Hurco ran away with it compared to the other controls, scoring 0.67.  In essence, that means 2/3’s of Hurco respondents said their control rocks.  I haven’t had the pleasure of using a Hurco control, but I know they have a lot of awesome features, especially in the area of Conversational CNC. One user remarked, “Extremely quick on-machine programming, especially for helix and thread mill operations.”

Accordingly, we’re awarding Hurco our Gold Customer Satisfaction Seal for 2017:

CNCControlCustomerSat2017GoldHurco.jpg

Find out more about the survey on CNCCookBook.com

2017 goes out with a BANG!

 The all new BX40Ui

The all new BX40Ui

Hurco has several machine "Specials" running for the next couple of weeks. Usually Hurco ships the last machines of the year by December 15th! So time is running out to get a new machine on your floor by year end. There are only a few machines of each of these models available. The following specials are running on a few select models. If there is a model you are looking for and do not see it, give us a call!

VM10HSi - 20,000 RPM Spindle, now $89,995.00
VMX24HSi - 18,000 RPM Spindle, now $108,495.00
VM10i - Max 5 Control - now, $57,995.00
VM20i - Max 5 Control - now, $74,295.00
VMX42SWi - CTS, Max 5 - now, $220,995.00
TMX8i - Max 5 Control - now, $92,995.00
TMM10i - Live Tooling Lathe with Tailstock, Presetter, Parts Catcher, now $117,195.00



Call or email Gage Machine Tool today to get your year-end deal!
1-913-982-7851

My Experience

Guest Post by Billy Briggs - SOE Metals

SOE METALS

Billy Briggs

My story begins 4 months ago when a life long friend approached me asking if
I ever thought about starting my own business.  I had been around lasers and
plasmas my whole life but never thought about getting myself a mill and
lathe.

So in January, I contacted a company and the salesman sounded great
but he lacked communication.  So I gave up on that company and that is when I
turned to Gage Machine Tool.  I called and within a week Dirk(the owner) and
Chad his trusty salesman came and had a lunch meeting with my wife and me.
Not only were they super knowledgeable of the machines and tools, but they
brought with them an actual controller off of a machine.  That had me sold
on the spot.  It was so easy to go through the steps to get a high-quality
part.

So after we got approved and the machines were delivered March 6th.
I purchased the VM10i and the TM8i, they were so tough looking.  We had to
wait a couple weeks for me to get the correct power put in (no 3 phase
direct) I have to run off of a 50hp phase converter.  Then 2 service techs
came and had them hard installed in a matter of hours.  The following Monday
Chad Waldo came and the next 3 days he and I put in some long hours.  He
wanted to make sure I was super comfortable running and programming both the
mill and the lathe that he stayed as long as I wanted him to.  

He came back in 2 weeks and was very surprised to find I had been
doing such a great job.  How could you not with such an amazing machine!  I
still have questions from time to time but rest assured Chad and his staff
are super eager to help!

I would recommend the Hurco brand and Gage Machine Tool to anyone and everyone. Such an easy machine to work with to get critical tolerances within .0005 of an
inch.

-Billy Briggs - SOE METALS

 Billy workin it on his TM8!

Billy workin it on his TM8!