programming

My Experience

Guest Post by Billy Briggs - SOE Metals

SOE METALS

Billy Briggs

My story begins 4 months ago when a life long friend approached me asking if
I ever thought about starting my own business.  I had been around lasers and
plasmas my whole life but never thought about getting myself a mill and
lathe.

So in January, I contacted a company and the salesman sounded great
but he lacked communication.  So I gave up on that company and that is when I
turned to Gage Machine Tool.  I called and within a week Dirk(the owner) and
Chad his trusty salesman came and had a lunch meeting with my wife and me.
Not only were they super knowledgeable of the machines and tools, but they
brought with them an actual controller off of a machine.  That had me sold
on the spot.  It was so easy to go through the steps to get a high-quality
part.

So after we got approved and the machines were delivered March 6th.
I purchased the VM10i and the TM8i, they were so tough looking.  We had to
wait a couple weeks for me to get the correct power put in (no 3 phase
direct) I have to run off of a 50hp phase converter.  Then 2 service techs
came and had them hard installed in a matter of hours.  The following Monday
Chad Waldo came and the next 3 days he and I put in some long hours.  He
wanted to make sure I was super comfortable running and programming both the
mill and the lathe that he stayed as long as I wanted him to.  

He came back in 2 weeks and was very surprised to find I had been
doing such a great job.  How could you not with such an amazing machine!  I
still have questions from time to time but rest assured Chad and his staff
are super eager to help!

I would recommend the Hurco brand and Gage Machine Tool to anyone and everyone. Such an easy machine to work with to get critical tolerances within .0005 of an
inch.

-Billy Briggs - SOE METALS

Billy workin it on his TM8!

Billy workin it on his TM8!

SFQ - How does it work?

 

I have been asked several times of late about the SFQ feature on the Hurco control and thought I would dig up a previous blog post by Mike Cope at Hurco to explain in detail. I admit, I do not have the best explanation for how this works. So I will let Mike do the talking.

SFQ in detail

Its an excellent read and Mike does a good job explaining everything Hurco, I would highly recommend you subscribing to his posts and these as well!

If you have something that you would like us to highlight here please let me know!
Thanks,

Chad Waldo